PureIT ClassicPureIT Ultima 418 Features SpecificationsGerm Kill Kit FAQVideoFeaturesSpecificationsGerm Kill KitFAQVideo

Pure IT Classic Features

Say goodbye to all the hassles & worries related to drinking water. Pureit is the easy, practical and affordable route to obtaining a clean glass of water.

Buy Now

Specifications

Pureit has been certified by more than 20 international laboratories for meeting the highest safety standards.

Buy Now

Germ Kill Kit

Pureit works with a break-through 'Germkill Technology'. It has an advanced Multi-Stage Purification which gives you water that's completely free from harmful germs. Click on the thumbnails below.

Buy Now

Frequently Asked Questions

If you have to know more about Pure It Classic you can read the manual Here or check out the questions below

Buy Now

Input water may contain many materials which affect the taste of water. Of these, Pureit removes materials like oil, sand, soil, clay, dirt, decayed animal and plant waste, and harmful pesticide impurities and is therefore likely to improve the taste of water. However, Pureit does not remove some dissolved salts that may contribute to taste like sodium chloride salt, calcium and magnesium. In fact, Pureit retains some ‘good’ dissolved salts present in drinking water. This may affect the taste of water.

Yes, the water will be free of harmful germs, but there may not always be an improvement in taste. However by pouring brackish/sea water into the Pureit, there may be a risk of choking the system, and the ‘Auto Shut-off’ mechanism may malfunction.

No, this is not a problem. The specially designed ‘Polisher’ removes residual chlorine, giving you absolutely safe, odor free, great tasting and pure drinking water from the transparent chamber.

This normally happens because of temperature differences. It does not affect the working of your Pureit and you will continue to receive water that is completely protected from harmful germs

If some part of Pureit breaks accidentally, please call Pureit helpline. We will arrange to send you a replacement part. You will however have to pay for the replacement part.

In some cases, as with colloidal clay suspensions and with soluble salts of calcium, magnesium, iron etc., the turbidity and colour may not be completely removed. In these cases please ensure that there are no deposits or scales in the Transparent Chamber – if these are there then clean them by using a disinfectant. Rinse the Transparent Chamber thoroughly with Pureit water. Once this is done, the output water will be microbiologically completely protected from harmful germs even if some colour persists.

Dissolved chemicals in water can occassionally precipitate out of the water, and deposit inside Pureit. This however does not in any way affect the Germkill capability of Pureit. To avoid scaling, rinse the Top Chamber & Transparent Chamber once in a while. If scaling happens in the Top Chamber or Transparent Chamber, you should gently remove it with water (descaling). Do not use any abrasive cleaners or tools.

The first batch of water that gets purified in your new Pureit, or from a new Germkill Kit, should be drained away when it collects in the transparent chamber. This batch of water may contain some black particles that have got loosened from inside the PolisherTM during transit. Black particles may also appear as a result of shifting or tilting Pureit or when you are using Pureit after several days. It should be noted that these black particles are a part of the Polisher’s specially designed porous filter derived from natural coconut shell and are therefore completely safe, even if accidentally swallowed. To remove these black particles pour the collected water back into the top chamber and rinse the transparent chamber with Pureit water to remove any particles that may be stuck to the sides.

This happens when the Germkill Life Indicator turns fully red. You need to change the Germkill Kit immediately as Pureit’s Auto Shut-off mechanism doesn’t allow unsafe water to pass to the transparent chamber.

It depends on the quality of water that is put into Pureit. Typically 9 liters of water gets purified between 1-5 hrs. Cleaning the Activated carbon Trap regularly can also improve the flow rate.

While the GKK has been designed to purify 1500 Ltrs water when the input water temperature is 25°C under moderate humidity conditions, the actual purification capacity will vary depending upon the input water quality, temperature & humidity conditions. Be assured that the quality of water ex-Pureit tap will always be same in terms of safety against pathogenic microorganisms.

Video

How work does PureIT Classic Work?

Pure It Ultima 418 Features

Pureit is a revolutionary innovation by Unilever to provide solution to the need of safe drinking water. It is world’s one of the most advanced in-home water purifier and first of its kind. Infact, it is world’s largest selling water purifier*.

Buy Now

Specifications

Unilever Pureit Utlima 418 Water Purifier with advanced 6-stage purification system. Get 9 - 12 litre purified water per hour, 10L water storage, digital advance alert system and more

Buy Now

Germ Kill Kit

Pureit works with a break-through 'Germkill Technology'. It has an advanced Multi-Stage Purification which gives you water that's completely free from harmful germs. Click on the thumbnails below.

Buy Now

Frequently Asked Questions

If you have to know more about Pure It Ultima 418 you can read the manual Here or check out the questions below

Buy Now

Pureit Ultima 418 has a 6-stage purification system which ensures you get water that is ‘As Safe As Boiled Water’ and also removes excess total dissolved solids (TDS) to make your water tastier. In the first stage, the water passes through the Pre-Sediment Filter which removes fine and coarse particulate impurities/dirt. The second stage is the Pre-RO Carbon Filter that removes chlorine and organic impurities like harmful pesticides. It also adsorbs bad taste and odour-causing organic compounds from water. The third stage is the Post-Carbon Sediment Filter which removes the remaining dirt. Then the water passes through the RO Membrane at high pressure, with the help of an inbuilt pump. The RO removes dissolved salts, hardness, pesticides and heavy metals like arsenic, lead and mercury. It also removes microbial contaminants like bacteria, virus, protozoa and parasites. The fifth stage is the Micro Filtration (MF) Membrane which acts as an additional assurance of safety towards microbial contaminants. The last stage is the Post-RO Carbon Filter, which removes bad odour and enhances the taste of purified water.

Pureit Ultima 418 has a storage tank capacity of 4 Litres. The process of filling the storage tank is fully automatic and when you remove water, the purification process automatically starts and refills the storage tank, provided power is on.

Pureit Ultima 418’ can purify upto 9–12 Litres of water per hour. However, the time taken to purify depends on the life of the filters, the input water pressure, TDS and other impurities present in water.

You need to call the Pureit Helpline No.09613105105 and order for a Germkill Kit™. The Customer care specialist will visit your place and replace the Germkill Kit™ at a nominal cost.

Pureit Ultima 418 will purify “potable” water for removal of hardness and other impurities to give you safe drinking water. If the input water has impurities normally not present in drinking water (high iron/turbidity/microbial contamination etc.) or water is from unknown source (river/lake/pond/borewell etc.) then suitable pre-treatments may be required.

You need to replace the Pre-Sediment Filter, Pre-RO Carbon Filter and Post-RO Carbon Filter when the second light (CHANGE GKK light) starts blinking BLUE. These parts can be bought together by ordering GKK-1. You need to replace the Pre-Sediment Filter, Pre-RO Carbon Filter, Post-Carbon Sediment Filter, RO Membrane, Post-RO Carbon Filter and Microfiltration Membrane (MF) when the ‘CHANGE GKK’ starts blinking RED. These parts can be bought together by ordering GKK-2

No, it is recommended to throw the first cycle of water that is fiIled in the storage tank when the new Pureit Ultima 418 purifier is installed and also whenever the GermkilI Kits are replaced.

It is not recommended to open and service the device by yourself. Call our customer care if you face any issue which requires servicing

It is not recommended to use the reject water for any kind of consumption (drinking or cooking). It can probably be used for gardening or cleaning floors.

Please call the Pureit Careline number 09613105105. Our technicians will visit your house and will guide you on the repairs required. There will be a nominal visiting charge and you would need to buy the parts required.

First turn off the Ball Valve if you find any leakage from the purifier, then turn off the power switch. Check for any visual improper fitment (like tap) and then call our Pureit helpline number and register a service request.

You can use stored water for 2 days. If it is not used for more than 2 days, we advice you to discard 2 cycles (10 litres) of water, refill and then consume.

Video

How work does PureIT Ultima 418 Work?